PLEASE READ FULL INFO BEFORE PURCHASING

All sales are final and cancellations or returns are not accepted for any Floating Cap DIY kits. Ships approximately 7-10 business days (2 weeks) after order is placed.

Transform your Work LS center caps into floating center caps with this conversion kit. These caps will spin effortlessly, will remain level while parked and have a slight “floating” feature while driving, enhancing the overall appearance of your wheels. This DIY kit utilizes your current center cap emblems and does not include any emblems. Please note that you need to have a set of Work VS center cap emblems to transfer onto the new floating cap assemblies. Work VS center cap in display photos is for example only.

Paper Instructions are included, and a video of the install is attached here.

Kit includes the following - 

4x floating cap conversion assemblies 

4x 3M 60mm double sided tape

1x emblem centering tool

Key reminders!  
- These will convert your caps to spin. In order for there to be enough clearance, there is the possibility you may need to lightly sand down the inside bore of your center cap opening of the wheel face. This may be common on chrome plated or freshly powdercoated faces. Some center caps may be tight when normally mounted, which in order to spin freely will need the clearance around the cap. 

- There is approximately 15mm of components behind the center cap. You may need to measure to ensure your axle/axle nut will not interfere with the components causing the cap to be stuck.

- This kit will slightly protrude the center cap emblem original location due to the required clearance behind the emblem to spin. 

These kits are 3D printed with ABS filament and use ball bearings for the spinning components. Never use a screwdriver or attempt to disassemble the components as it will damage and break the small parts.